Buffer Technologies Ruger Mini-14 / Mini-30 Recoil Buffer

Our Buffer Technologies recoil buffers are an excellent way to reduce parts wear and recoil of your firearms. Polymer recoil buffers prevent the metal on metal impact of a firearms bolt or slide from impacting the fame while firing. Our Buffers are made from Estane 58130 which won't be affected by common firearm cleaners and should last for hundreds and hundreds of rounds. Buffers will need to be replaced eventually, but the reduction of wear and recoil they provide makes them a valuable firearm accessory 

The Mini-14/30 Recoil Buffer works the same as the M1A/M14 Buffer, by eliminating the op rod contact with the receiver. The Mini-14/30 Recoil Buffer will protect your operating rod, the weak link in the system, from excessive shock. With a Recoil Buffer installed you'll have less felt recoil, more muzzle stability, less action noise, and will extend the service life of your weapon

The Mini-14/30 Recoil Buffer fits onto the recoil spring guide rod. As with all other models of the Recoil Buffer™, installation is simple and can be done without any special tools.

The Mini-14/30 Recoil Buffer differs from others in our line of products, in that it does not end the metal to metal contact of the bolt to receiver. For a Mini-14/30 or M1A/M14 to operate reliably, the bolt must impact the receiver with each firing of the weapon. This contact is required to prevent excessive stress on the roller cam on the side of the bolt.(will not fit series numbered 1801-1809.)