DIProducts Aluminum Dovetail to Picatinny Black Scope Rail For All CZ 457 Rifle

Convert the 457 CZ dovetail to a standard scope rail. Great for Weaver or Picatinny style rings so you can easily get the right height ring for your scope. Easily attaches with the 4 supplied steel set screws to hold the mount firmly to the receivers...

DIProducts Dovetail to Picatinny CZ 457 25MOA Black Scope Mount

Convert the stock dovetail to a standard Picatinny scope mount with 25MOA built into the rail. Adds the extra elevation (MOA) for 22 long rifle so you can set your scope "zero" at 200yrds and beyond for those long shots. Great for Weaver and...

Tactical Solutions .860 Matte Black Compensator 1/2x28 Thread

Tactical Solutions .860 Matte Black Compensator 360° ports to help reduce muzzle rise, while maintaining a clean, classy look that matches the contour of any .860” target barrel.  1/2x28 Threads Verify your barrel diameter this...

Purple Thread Locker Low Strength 2mml Tube

Purple Thread locker Strength Low Color Purple 2mml Liquid Form Tube Chemical Type Anaerobic For Fastener Diameter up to 1/4" Begins to harden in 4 minutes Gap Fill 0.007" Full Cure 24 Hours Temperature Range 60 Degrees to 300 Degrees...

DIProducts Black Trigger Shoe Kit Anodized Aluminum For CZ 452/455/527 Rifles

DIP's Trigger Shoe is CNC'ed from 6061 billet stock then gold anodized to help give your CZ a custom look. Fitment: Attaches easily to the factory CZ 452/455 and some CZ 527 that have a 0.24" wide trigger            ...

DIProducts 11mm Dovetail to Picatinny Black Scope Rail For CZ 455/452/453 Rifle

Produced from high quality 6061 aircraft aluminum on computer controlled milling machines right here in the US. Mil spec hard anodized for a long lasting finish. Slides onto the 455 dovetail and easily attaches with the six(6) supplied set screws that,...

DIProducts 10% Extra Power Firing Pin Spring for all CZ 452/453 Rifles

Diproducts extra power spring is a big improvement over the factory spring, it decreases lock time and provides a very positive primer strike. The new extra power spring will give you years of reliable service. Easy drop in replacement, no special...

DIProducts Black Aluminum Trigger Shoe Kit Sako Quad, Tikka T1X, CZ 457 Rifles

The DIProducts Trigger Shoe is CNC'ed in the Northwest from 6061 billet stock then anodized for a lasting finish. Attaches easily to the factory trigger blade with the two supplied Allen set screws. Great for bench rest shooting. No gunsmithing...

DIProducts Black Compensator .860" 1/2x28 TPI for Ruger Rimfire, S&W, CZ Rifle

Diproducts Compensator operates on the same principle as large caliber compensators.Special engineered internal baffles help direct the expanding gasses out rather than rely on the expanding gasses themselves to find their way out.Because you...

DIProducts Silver Trigger Shoe Kit Anodized Aluminum For CZ 452/455/527 Rifles

Diproducts Trigger Shoe is CNC'ed from 6061 billet stock then gold anodized to help give your CZ a custom look. Fitment: Attaches easily to the factory CZ 452/455 and some CZ 527 that have a 0.24" wide trigger (1) blade with the two supplied Allen set...

DIProducts Extended Magazine Catch for CZ 452, 453, 455, 512 Rifles

Extended magazine catch for any 452, 453, 455 and 512 CZ rimfire rifles. Far more convenient and noticeably easer to release the magazine for faster magazine changes. Approximately .080"(2mm) longer than stock Easy drop in installation, NO gunsmith...

DIProducts 4 Piece Spring Kit for 452/455 Trigger Spring Kit

Diproducts 4 piece trigger spring kit. Simple and easy to install. Allows you to safely adjust the trigger pull weight to suite most styles or needs. Works great with the CZ adjustable sear kits Fitment: CZ 452/455 Trigger Spring Kit