Product Description
25MOA Picatinny scope rail in black, designed for the Savage MKI, MKII & 93/93R series rimfire rifles with factory drilled & tapped "E" and non "E" receivers. Works great when using Picatinny and Weaver style rings on those really long, large objective high powered scopes. Made from billet aircraft aluminum and then black coat anodized for a long lasting finish. The ejection port area is "cut-out" for easier, cleaning, single shot loading or clearing a stuck spent case. Uses 4 #15 TORX head screws - included.
25MOA (minutes of angle) means the mount has a slope built in so you can set your scopes "zero" all the way out to 300yrds when you practice with 22 long rifle. However because of the added slope the 25MOA limits how close you can "zero" to about 50yrds with most scopes.
Fitment: Savage MKI, MKII, 93/93R with Factory drilled and tapped receivers
- Light weight at just under 2oz
- Black
- Approximately .34" tall from the receiver to the top of the mount
Recommended Tools:
- (PURPLE THREAD LOCKER)
- Inch pound torque wrench
- #15 TORX driver
25MOA built in to the mount to allow most scopes to be "zeroed" anywhere from 50-300yrds with 22LR target or subsonic ammunition
Large Ejection port opening allows easy access for single shot loading, feed or ejection/chambering problems.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Savage mk 2 scope rail by DIP
Excellent and very high quality scope rail , precisely cut to fit savage mk 2 profile. Very highly recommend for serious shooter
