Product Description
Picatinny scope mount in anodized silver, designed for the Savage MKI, MKII & 93/93R series stainless steel rimfire rifles with factory drilled & tapped "E" and non "E" receivers. Works great when using Picatinny and Weaver style rings on those really long, large objective high powered scopes. Made from billet aircraft aluminum and then silver coat anodized for a long lasting finish. The ejection port area is "cut-out" for easier, cleaning, single shot loading or clearing a stuck spent case. Uses 4 #15 TORX head screws - included.
5 SCREWS INCLUDED
Recommended Tools:
Silver
Purple LocTite(222)
Inch pound torque wrench
#15 TORX driver
Inch pound torque wrench
#15 TORX driver
5MOA built in to the mount to allow most scopes to be "zeroed" anywhere from 25-150yrds using 22LR target or subsonic ammunition
Light weight at just under 2oz
Approximaterly .31" tall from the receiver to the top of the mount
Large Ejection port opening allows easy access for single shot loading, feed or ejection/chambering problems.
